Micromechanical properties of one-step and sequentially crosslinked UHMWPEs for total joint replacements

Microindentation hardness testing was applied to five types of highly-crosslinked ultrahigh molecular weight polyethylenes (UHMWPEs) for total joint replacements. UHMWPE's were crosslinked using the same total radiation dose (75 kGy; γ-radiation) either by the standard, single-step irradiation (one-step crosslinking) or by the newer, several-step irradiation (sequential crosslinking). Each irradiation step was followed by thermal treatment (annealing at 110 °C or remelting at 150 °C) in an inert atmosphere. We showed that: (i) the micromechanical properties were determined by the last thermal treatment step, while the number of irradiation cycles was insignificant and (ii) the values of microhardness, microcreep and microplasticity from the microindentation experiments were in excellent agreement with the changes of UHMWPE structure, characterized by IR and DSC. Statistical evaluation of the results, the agreement with theoretical predictions and the comparison with previous studies on similar systems demonstrated that microindentation was a reliable and sensitive method of UHMWPE characterization.     

Dependency of dynamic interlaminar shear strength of composites on test technique used

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic ILS strength was determined based on two experimental techniques, namely torsional split Hopkinson bar (TSHB) apparatus using thin walled tubular specimens and compressive split Hopkinson pressure bar (SHPB) apparatus using single lap specimens. The results obtained from these techniques are compared. In general, it is observed that dynamic ILS strength for composites obtained by TSHB testing using thin walled tubular specimens is lower than the dynamic ILS strength obtained using single lap specimens in compressive SHPB. The issues involved in TSHB testing of thin walled tubular specimens made of composites are discussed and the reasons for reduced dynamic ILS strength using thin walled tubular specimens are highlighted. Finite element analysis (FEA) of thin walled tubular specimens made of composite and resin subjected to quasi-static torsional loading is presented. Using FEA results, the reasons for lower ILS strength of composite thin walled tubular specimens are substantiated.     

Qualitative and quantitative ATR-FTIR analysis and its application to coal char of different ranks

This paper analyzes the coal to char stages of char formation of six coals of different ranks by using Fourier transform infrared coupled w ith attenuated total reflectance(ATR-FTIR).The chars w ere obtained by coal pyrolysis carried out at temperature range of 450~700℃.The data obtained show s the pragmatic disappearance of the aliphatic hydrogen content w ith increasing char formation temperature.Numerical evaluation of the spectra enabled the determination of aromaticity,fa.The aromaticity w as found to be betw een 0.66~0.79 for lignite,0.75~0.90 for sub-bituminous,0.84~1.00 for low volatile bituminous,0.83~1.00 for high volatile bituminous,0.94~1.00 for semi-anthracite,and 0.97~1.00 for anthracite respectively.With increasing rank of coal samples,spectra exhibit rising aromaticity and enhanced condensation of aromatic rings,w hereas the aliphatic chain lengths decrease.     

Development of a method using high‐performance liquid chromatographic fingerprint and multi‐ingredients quantitative analysis for the quality control of Yangxinshi Pian

A simple and reliable method of high‐performance liquid chromatography with diode array detection method was developed for fingerprint analysis and simultaneous determination of six compounds including puerarin, salvianolic acid B, berberine hydrochloride, palmatine chloride, dehydrocorydaline, and icariin in the Chinese medicine preparation Yangxinshi Pian. The separation was performed on an Agilent Eclipse XDB‐C₁₈ reserved‐phase column (250 mm × 4.6mm I.D., 5 μm) using gradient elution with 50 mmol/L monopotassium phosphate aqueous solution and methanol as mobile phase at a flow rate of 1.0 mL/min. The column operating temperature was set at 30°C, and the detection wavelength was 280 nm. The method was validated by linearity, precision, accuracy, stability, and recovery. For fingerprint analysis, 25 peaks were selected as the common peaks, and four kinds of similarities including cosine similarity (S), ratio of similarity (S′), projection content similarity (C), and content similarity (P) were applied to evaluate the quality consistency of different batches of Yangxinshi Pian. The results showed that the developed method was an efficient tool for quality evaluation of Yangxinshi Pian.     

分子量条带用蛋白质

蛋白质的生物化学、生物物理学及化学生物学研究中,凝胶电泳是常见且重要的分析手段。然而其背后所蕴含的一众有关蛋白质结构及功能的知识点长期被国内外本科相关专业教学忽略。从探讨蛋白质凝胶电泳的分子量指示物的筛选标准出发,分析比较了几类常见的分子量指示物,并基于一级结构和高级结构的稳定性对分子量条带用蛋白质的筛选提出了一些合理的推论。     

初中化学“酸和碱的性质”创意教学*——探析食品发热包

以食品发热包为主题情境,通过探析发热包成分、解密发热原理、计算原料配比、配制发热包等环节梳理酸和碱的性质、用途。从元素观、转化观的视角认识物质转化规律,体现物质研究的一般思路,凸显科学探究的基本过程。通过设计方案测定发热包中碳酸钠的含量,总结混合物成分鉴定及定量测定的方法;归纳气体定量测定的影响因素。呈现一堂学科观念、学科方法教学具体课例,凸显物质研究、定性检验、定量测定的基本方法。     

定量的复合金属锂作为三维泡沫锂电极用于锂电池的研究

金属锂作为电池的负极材料具有极高的比容量和极低的氧化还原电位,能够显著提升电池的能量密度。然而,金属锂负极在实际应用中所面临的主要问题是锂枝晶、界面副反应和电极体积变化大的难题。在本文中,我们提出了一种通过将定量的金属锂与三维骨架进行复合形成三维泡沫锂负极的策略,并利用三维泡沫锂来抑制锂枝晶的生长和缓解电极的体积变化。因此,三维泡沫锂电极有利于金属锂负极的高效利用,并能借助其与平面锂箔相比更高的比表面积和更多的反应位点来提升电池的倍率性能。因此,通过采用三维泡沫锂,对称电池的循环寿命和倍率性能都得到了有效的提升。EIS数据结果表明,三维泡沫锂能够减小对称电池的电荷转移阻抗。而且,将三维泡沫锂作为负极组装的LTO全电池,与锂箔作为负极相比,循环1000周平均放电比容量从65 mAh·g^-1提升至121 mAh·g^-1。     

Bipolar Electrode-based Electrochromic Devices for Analytical Applications – A Review

Bipolar electrode-based (BPE-based) electrochromic devices have garnered increasing attention in the past decade. These BPE-based electrochromic devices have been used for analytical health monitoring, point-of-care (POC) diagnostics, and chemical sensing. In this review, we highlight recent progress made regarding BPE-based electrochromic devices constructed for these analytical applications. Various, available electrochromic materials are summarized in the first section, after which the different device types (e. g., paper-based and self-powered) are discussed. Biological- and chemical-based analytical demonstrations of these devices are then reviewed. Finally, we conclude this review with a perspective on the future developments of BPE-based electrochromic devices in analytical applications.     

An Overview of Wearable and Implantable Electrochemical Glucose Sensors

Electrochemical glucose sensors have garnered considerable attention because of their attractive prospect in point-of-care testing (POCT). In this review, we firstly introduce the principles and challenges of electrochemical glucose sensors. Subsequently, we present an overview of the application of electrochemical glucose sensors and discuss their advantages and drawbacks. Wearable and implantable devices based on diverse target biofluid and platforms provide a considerable prospect of accurate and continuous monitoring. Thus, we believe that the future development direction of electrochemical glucose sensors is non-invasive, wearable devices and implantable devices with minimally invasive for continuous glucose monitoring in real time.